Tile Samples Kitchen Tiles Bathroom Tiles Floor Tiles Mosaic Tiles Pallet Deals Adhesive Tiling Tools Underfloor Heating Wet Rooms No More Ply Weber Adhesives Tile Rite PCS Construction Boards

MAJOR SUPPLIERS

Elios Tiles Ibero Tiles Halcon tiles Mosavit tiles Cerdomus tiles
Tile Banner

PCS Construction Boards


PCS logo

PCS construction boards stack imageWhat is PCS tile backer board?
PCS board is the perfect solution to insulate and waterproof in one operation. Ideal to use as an insulation board for most internal construction tasks. The board can be fixed to any suitable wall or framework of wood or metal. Lining a room with PCS board can be a one man operation, as it is light to use and can be cut easily with a saw or knife. When fixed into place, the joints should be reinforced with a PCS self adhesive fibreglass mesh tape, tiling can then commence.

PCS board helps prevent heat loss through concrete floors and is therefore ideal for use with undertile heating systems. When using PCS board in conjunction with underfloor heating, a warm floor can be achieved in as little time as 20 minutes, whereas it can take two hours or more on a system without it. A host of leading underfloor heating manufacturers recommend using PCS board.


What is PCS board made of?

PCS Thermal Substrate Board (tilebacker board) is constructed with a rigid extruded polystyrene core and is layered both sides with a alkaline resistant glass fibre reinforcement mesh encapsulated with a high polymer modified cement based coating.

Prices

pcs construction boards image


6mm 1200 x 600 £10.73 including VAT
10mm 1200 x 600 £10.73 including VAT
20mm 1200 x 600 £12.45 including VAT
• Easy to cut
• Very cost effective, inexpensive to buy, plus fast to lay
• Energy saving
• Waterproof
• Measurement for each board is approx .72m2
Download PCS Construction Board Sales Literature


















How to use PCS Thermal Substrate Board
with Electric Under Floor Heating

laying pcs boards stage 1
Stage 1. Lay each board using a Flexible rapid setting tile adhesive applied with a 8mm notched trowl to form a level base. boards must be pressed firmly into adhesive, whilst the adhesive is still tacky.






laying pcs boards staggered stage 2
Stage 2. Lay the boards with staggered joints. Lightly butt the boards together leaving a 5mm gap around the perimeter of the room









laying pcs boards tape joints stage 3
Stage 3. All gaps must be filled and all joints taped with an alkaline resistant glass fibre reinforcement tape.









laying underfloor heating over pcs boards stage 4
Stage 4.Now lay the heating element.










laying tiles iver UFH and pcs boards stage 5
Stage 5.In certain circumstances it may be useful to apply a cement based flexible self levelling compound over the underfloor heating element reducing the risk of damaging the cables and to assist in the laying of the tiles. You can then lay your tiles with a cement based flexible floor adhesive.





Floor Build up using PCS Construction Board
floor build up using PCS Boards

PCS Board Sizes

600 x 1200 x 6mm Thick
600 x 1200 x 10mm Thick
600 x 1200 x 20mm Thick