Tile Samples Kitchen Tiles Bathroom Tiles Floor Tiles Mosaic Tiles Pallet Deals Adhesive Tiling Tools Underfloor Heating Wet Rooms No More Ply Weber Adhesives Tile Rite PCS Construction Boards

MAJOR SUPPLIERS

Elios Tiles Ibero Tiles Halcon tiles Mosavit tiles Cerdomus tiles
Tile Banner

No More Ply


For tiling that looks perfect year in, year out, for years to come

(don’t even think about using problematic substrates
like plaster-board, mdf, chipboard, hardboard and, yes, plywood)

No more
loose tiles

No more
stained grout

No more
rotten substrates



It’s the way we all did it. Plywood was used for over- boarding floorboards before laying or fixing ceramic tiles. However, this caused problems because if the grouting cracked or the sealant failed, water would creep in and rot the plywood. Also, there was a problem with fungal growth – this often reacted with the adhesive causing the tiles to become loose. The pro’s amongst us thought the problem could be overcome by using marine grade plywood, but preservatives in this material migrated through the grout and gave it an orange stain. A minimum of 15mm plywood has to be used for overboarding floorboards – creating, of course, a dangerous step into the tiled room. Now there is a solution to eliminate all these problems. A unique, easy to lay, water resistant tile backer board that’s just as effective on the wall as it is on the floor. That’s NO MORE PLY.

The products...

no more ply boards
No More Ply Board

6mm Thick 600x1200 Tile Backer Board

• Moisture Proof
• Only 6mm is added to the floor height
• Easy to cut
• Very cost effective, inexpensive to buy, plus fast to lay
• Heat resistant
• Measurement for each board is approx .72m2

Price per board £7.30 including VAT
no more ply mega stregth adhesive
No More Ply Adhesive

310ml Mega Strength Polyurethane Adhesive

• 1 tube covers approx. 6-7 Board
• Almost instant bonding to wood, metal, stone & concrete
• Sets in 5-10 minutes to an exceptionally high bond strength
• Waterproofs & reinforces joints
• Replaces tape for all tile backer boards
• Totally waterproof

 Price per tube £6.15 including VAT
no more ply screws
No More Ply Screws

Box of 200 25mm screws

• Self countersinking
• Self drilling
• For use with No More Ply Boards
• Steel countersunk
• Hardened
• Zinc plated

Price per box £5.45 including VAT
no more ply sbr primer
No More Ply SBR Primer

Professional Tilers Primer

• Multi-purpose primer
• Waterproofer
• Bonding agent
• For priming No More Ply Boards
• Dilute 1:3 for Boards and apply evenly
• Coverage approx 12m2 per litre

Price per 1ltr £7.26 including VAT
          no more ply scoring knife

No More Ply Knife

Carbide Tipped Scoring Knife

• Professional scoring knife
• Foe use with No More Ply Tile Backer Boards
• Tungsten carbine tipped for extra long life
• Outlast conventional cutting knives

 Price per knife £5.74 including VAT








10 more reasons to use
NO MORE PLY…

moister proof Moisture-proof
Dimensionally stable, unaffected by moisture absorption. The perfect substrate for all tiles in bathrooms and kitchens. Ideal for wet rooms. For total waterproofing use SBR Primer.
Thin Thin
Only 6mm is added to the floor height when overboarding timber floors.
Board sizes available: 1200 x 600 x 6mm


east to handle Easy to handle
Handy 1200 x 600 x 6mm size. Will fit
into most small cars and vans.
Always store flat.

easy to cut Easy to cut
Most cuts can be done simply with the NO MORE PLY Scoring Knife. For awkward shapes use a jigsaw with a tungsten blade.


east to lay on floors Easy to lay
8 x NO MORE PLY screws per sheet and a small amount of NO MORE PLY Mega Strength Polyurethane Adhesive and it’s laid!
Easy to fix on walls



very cost effective Very cost effective
Inexpensive to buy.
Fast to lay.




impact resistant Impact resistant
Minimal damage during transportation, handling, storing and laying - excellent for all busy sites.







heat resistant Heat resistant
Ideal for use most electrical underfloor heating systems.




incombustible Incombustible
Contains no asbestos and will not burn.





noise reducing Noise reducing
Excellent sound proofing characteristics make it ideal for overboarding in apartments.




NO MORE PLY is easy to fix. Here’s how…
Overboarding timber floors

sweep and clean a) Remove all old existing floor coverings. Screw floorboards (timber or chipboard) down firmly and sweep clean.
You are ready for NO MORE PLY.


applying adhesive b) Run two small beads of Mega Strength Polyurethane Adhesive on the back of NO MORE PLY. Lay in position and screw down using 25mm
NO MORE PLY screws. Screws must be inserted with a cordless screwdriver and eight screws per sheet is usually sufficient. Always stagger joints.

seal and reinforce joints c) Run a small bead of Mega Strength Polyurethane Adhesive on the edge of the laid boards and lay the next board down fixing again with 25mm NO MORE PLY screws. This method seals and reinforces the joints. Warning: Mega Strength Polyurethane Adhesive is an amazingly strong waterproof glue. Always wear gloves and wipe off excess glue with an old cloth. Use solvent in case of spillage.

cutting no more ply d) For straight cuts score with the NO MORE PLY Scoring Knife and snap. For curves and shapes use a jigsaw or nibble round pipes with tile nippers. 9mm boards may need 3/4 scores before snapping.











priming no more ply e) When the floor is complete, sweep clean and you are ready for tiling. Priming the boards with SBR Multi Purpose Primer (one part SBR to three parts water) will improve adhesion. Alternatively, wipe the surface of NO MORE PLY with a damp sponge just prior to spreading the tile adhesive. If undertile heating is being used, prime with one part SBR to three parts water before laying undertile heating and tiles.










covering concrete Overboarding CONCRETE floors

a) NO MORE PLY is ideal for covering dirty, cracked, worn out concrete floors. Always remove loose material, clean thoroughly and prime with one coat of SBR primer (one part SBR to three parts water) before laying No More Ply.









priming subfloor b) Make sure floor is clean and free from all loose material. NO MORE PLY boards must be primed both sides with one coat of SBR primer (one part SBR to three parts water). For best results lay NO MORE PLY on single part flexible rapid set adhesive ensuring joints are staggered.











cutting no more ply c) For straight cuts score with the NO MORE PLY Scoring Knife and snap. For curves and shapes use a jigsaw or nibble round pipes with tilenippers.











man with trowl d) When floor is covered with No More Ply, allow adhesive to set – see adhesive manufacturer’s instructions on setting time. Sweep floor clean and you are ready for tiling.











Overboarding WALLS

NO MORE PLY is also ideal for overboarding walls. ‘Dot and dab’ 6mm NO MORE PLY boards with single part flexi rapid set adhesive or Mega Strength Polyurethane Adhesive - ideal for overboarding new brickwork, plastered or previously tiled walls. In some applications plugging and screwing may be necessary. Priming the boards before tiling will improve adhesion.

no more ply 10 year guarantee Guarantee Terms:
The NO MORE PLY ten year guarantee only applies when correct installation procedures, as set out in this booklet, have been followed.


Enquiry

no more ply brochure

Download a brochure! - Click Here















no more ply BBA certificate
Download PDF of NO More Plys BBA Certificate - Click Here